Function:
Adjustable range: back tilt 70º±5º, leg tilt 40º±5º, back leg linkage function, bed dynamic bearing weight: ≥240kg.
The electric nursing bed can stand up between 0-75 degrees according to the needs of the patient. Through the cooperation of the nylon stainless steel guardbar and the mobile table, the patient can maintain a normal sitting posture, so as to complete the basic life needs of reading, writing, eating, drinking and so on.
Care at the four corners of the bed is equipped with wheels, can facilitate the patient to move, it's 3 connected to each other, can be flexible action, if the patient lying down for a long time the discomfort, the support frame of the nursing bed can be rolled up, so the patient can sit, if feel foot discomfort, can also support the footsteps of frame, the leg down under, let the patient posture are relatively comfortable.
Steps to install the bed:
1. When we install the medical bed, we install the bed legs first. The longer two are the bed legs, the screws on the bed legs are removed first, the bed legs are stuck on the bed board, and then the screws are fixed again.
2. Align the hole of the guard-rail frame with the hole position of the bed, fix it with screws, and the guard-rail switch is toward the side of the head of the bed.
3. Install the head and tail of the bed, the head board is higher, the tail board is shorter, and the hanging installation method is adopted. The bed head hook is aligned with the bed side iron pin, and the lock can be fastened.
4. The casters of the medical bed are connected by thread. The four casters are installed in the four screw holes, regardless of their positions.
5. Install and debug the controller. The motor and push rod have been installed before leaving the factory.
Hot Tags: electric hospital bed for medical use, China electric hospital bed for medical use manufacturers, factory, Electric Three-function Nursing Bed
